Fix Laptop Speakers Not Working Issue in a Moment

With the evolution of laptops and computers, mankind has been bestowed with numerous benefits and a lot of conveniences. Considering how these devices are capable of executing every possible task seamlessly, it’s no longer essential to put in excessive hard work when it comes to achieving perfection. However, one thing which mustn’t be forgotten is that despite providing an abundance of benefits, there are certain drawbacks to these devices as well, be it laptop speakers not working or the display facing issues.

You might keep confronting one or the other issues. Talking about the speakers of a laptop, they’re one of the necessary aspects of the system. Right from watching pictures to working on videos professionally, the absence of speakers can influence you tremendously.

But, don’t worry. There is always a solution to every issue. Thus, if your speakers have stopped working, here are some of the ways to resolve them without spending a lot of money.

Basic Solutions to Find Out Why Your Laptop Speakers Not Working

You certainly wouldn’t want to create a ruckus when the issue could be as minuscule as possible. So, to be on the safe side, confirm that you’re checking the basics of your laptop.

Cables & Volume

 To start with, have a look at the cables and headphone connections to check if there are few loose cables. If you’re not able to listen to anything with the connected headphones, try using some other USB or jack. There is a chance that your speaker might have its own volume control, thus look into it and increase the volume to its highest.

Settings of the Speakers

 If everything seems to be perfect, next would be the step to look into the settings of the speakers and change them if necessary. To do so, follow these essential steps:

• Open your windows search bar and enter Sound in it.
• Choose the Control Panel.
• A popup will appear on your screen.
• In the playback tab, you will confront available speaker devices.
• Choose the one you want to use, and set it to Default.
• Subsequently, choose Properties & open the Enhancements tab.
• Tick mark Disable entire Enhancements options.

Once done, then check your speakers again.

The Solution for Issues with the Audio Jack

 Moving ahead, even after applying the initial step you find no sound on a laptop, here is another step to help you out with it. Inside the headphone input jack of the laptop, you’ll confront a small switch. Whenever you would be plugging in your earplugs or headphones, this might end up shutting off the speakers of the laptop. And, whenever you remove the plug of the external device, the speakers might get turned on again.

Thus, try the plugin and plug out a method to check if the problem gets resolved or not. To do so, follow these underneath steps:

• Have a song or video being played in a loop on the laptop
• Plug in your headphones on the laptop and take them out Instantly. Try the same solution several times and with different speeds.
• After every test which you do, check whether the sound comes from the speakers or not.

The Solution for Issues with the Audio Drivers

 Another reason behind your laptop’s speakers not working could be a corrupt or old audio driver version. Thus, you should try updating these drivers and check whether the issue gets resolved or not. Most of the time, this solution works, so it’s better to try your luck, right? Here are the steps below:

• Open the Control Panel of the laptop and go inside the Device Manager menu.
• Once you’re in there, check out the Audio inputs and outputs menu to find the drivers which have been installed on the system.
• Upon expanding the menu, you’ll confront audio/speakers related drivers which are there on the laptop.
• Right click on the entire drivers which you find there and click on Update.

After this, your speakers would start working. You can resolve your printer's issues with the help of the device manager as well.

Check the Sound Controllers

 Regrettably, if you have already tried all of these solutions and there is still no sound on laptop Windows 10, don’t get worried. There are yet other techniques to get the base back. Next on the list is resolving the audio controller by resetting it fully. Below mentioned are the steps which will help you do it:

• Open the Run command on your laptop by pressing Windows Key + R simultaneously.
• Subsequently, enter devmgmt.msc in the box which opens and click the enter button.
• Once you are inside the device manager, right click on the sound card and now click on Disable Device.
• A confirmation box will appear on your screen, and you would have to click over the Yes to continue.
• You will have to wait for a few moments and then click right again on the sound card and click on Enable Device.

Once this process is finished, your laptop’s speaker must definitely start working.

Check the Sound Circuit Board

Before diving into the know-how of the audio circuit board, one thing which you should keep in mind is that this step is not essential in case your issue has been resolved through the other steps mentioned above. However, if you have not got your luck right, here is another chance to resolve the sound system by dislodging the board. This might seem a bit confusing but can be a smooth ride if you have managed to get the context right and are careful enough with the entire procedure. Here are the steps which will help you with the same:

• Either press the Windows key & X simultaneously or right click on the Start menu.
• Now, click on the Device Manager.
• Below the Sound, Video & Game Controller section, find out the active sound control of your laptop.
• Now, right click on it and select the Uninstall option.
• Once done, click on the Action Menu and choose Scan for hardware changes to start the automatic installation of the sound card.

The drivers of the computer will reinstall automatically. If that doesn’t happen, reboot the system, and the installation will occur on booting. These drivers will then begin working with the internal speakers.

The Solution for Issues with the Internal Speakers of the MacBook

 Apart from all the systems, if your issue lingers around mac speakers not working suitably, this step is definitely for you. There are undoubtedly different ways to get this issue resolved, like:

Latest Version of the OS

 The initial and most important step which you must be taking is ensuring that you’re using the upgraded and latest version of the operating system. If not, then back up your data and put your laptop on the update. Maybe, that will help your speaker run correctly.

Checking the Sound Setting

 However, if upgrading is of no use for you and your internal speakers are still not working, it’s time to examine the sound settings-

• Disconnect the entire external audio devices, USB cables, audio parts, etc.
• From the menu, choose System Preferences.
• Select Sound.
• Click on the Output tab, choose Internal speakers.
• If you cannot see Internal Speakers option, consult the Apple support
• If the volume slider is at low, move it to the right and again test it.
• If the Mute checkbox has been chosen, deselect it and recheck the sound.
• If it still doesn’t happen, maybe you can consult the support service.

Check Line-Out Port on Mac

 Another way to resolve this issue would be by checking out the line-out port.

• Disconnect the entire external audio devices and cables.
• And then, examine if the line-out port has a red light over it.
• If yes, then know that your system requires servicing.

Conclusion 

Of course, one of the significant issues which can arise with a system is laptop speakers not working correctly. It can bring several issues and troubles along. However, don’t bother, refer to this guide, and you can fix the issue by troubleshooting them. In case if laptop speakers not working issue still persists, then simply consult professionals. Consult tech savvy geeks at Uspcsolutions so as to get best guidance to get rid of this annoying issue.